Contents
pdf Download PDF
pdf Download XML
70 Views
15 Downloads
Share this article
Research Article | Volume 12 Issue 4 (April, 2026) | Pages 110 - 117
Accuracy of Different DentalAge Estimation Methods inAdults: A Cross-Sectional StudyUsing Radiographic Assessment
 ,
1
Assistant Professor, Department of Forensic Medicine & Toxicology, Shri Atal Bihari Vajpayee Government Medical College, Chhainsa, Faridabad, Haryana.
2
Senior Resident, Department of Dentistry, Shri Atal Bihari Vajpayee Government Medical College, Chhainsa, Faridabad, Haryana.
Under a Creative Commons license
Open Access
Received
Feb. 10, 2026
Revised
March 7, 2026
Accepted
March 30, 2026
Published
April 24, 2026
Abstract
Background: Radiographic dental methods estimate adult age by measuring changes in tooth structure, including changes associated with secondary dentine deposition. Their performance may differ across methos and populations.A im: To compare the accuracy of Kvaal, Cameriere pulp-to-tooth area ratio, and Drusini coronal pulp cavity index methods against documented chronological age in adults. Methods: A cross-sectional study included 200 adults with documented chronological age and suitable clinically indicated dental radiographs. Dental age was estimated using the three methods, where images and teeth were suitable. Estimation error, mean absolute error (MAE), root mean square error (RMSE), proportion of estimates within ±5 years, and agreement with chronological age were assessed. Results: In the illustrative results, mean chronological age was 39.2±10.4 years. Mean estimated ages were 40.6±10.5 years by Kvaal, 38.3±10.2 years by Cameriere, and 42.1±10.8 years by Drusini. MAE was lowest for Cameriere at 3.5 years (95% CI: 3.1–3.8), compared with 4.1 years for Kvaal and 5.2 years for Drusini. Estimates were within ±5 years of chronological age for 76.0%, 67.0%, and 58.0% of participants, respectively. The reported overall comparisons were statistically significant (p<0.001). Conclusion: In this illustrative dataset, Cameriere’s method showed the lowest estimation error and the highest agreement with chronological age, followed by Kvaal and Drusini. These results are hypothetical and must be recalculated from the actual study data before interpretation or reporting.
Keywords
INTRODUCTION
Age estimation is an important component of forensic identification and may be required in civil, criminal, immigration and other medico-legal settings. In adults, dental age assessment is challenging because most teeth have completed development and the age-related changes used for estimation are gradual and vary between individuals. Teeth remain useful for assessment because they are relatively resistant to environmental damage, and radiographic examination can be performed in living individuals without extracting teeth. Adult radiographic methods commonly assess changes that occur after tooth formation. Secondary dentine deposition progressively reduces the size of the pulp cavity, creating measurable changes in pulp-tooth dimensions. Kvaal et al. developed a method based on length and width ratios measured from dental radiographs, while later studies adapted the approach to digital panoramic images. Its performance may vary between populations, supporting the need to assess calibration and accuracy in the population under study. Comparative research suggests that the relative performance of these methods can differ by age group. In a study of Brazilian adults, de Miranda et al. compared Kvaal’s and Cameriere’s methods and found that the method with lower estimation error differed across age groups. A systematic review by Kazmi et al. reported that Kvaal width ratios, particularly the measurement at the midpoint of the root, were more closely associated with chronological age than some length ratios. AIM To compare the accuracy of different radiographic dental age estimation methods in adults against their known chronological age. OBJECTIVES 1. To estimate dental age using the Kvaal, Cameriere pulp-to-tooth area ratio and Drusini coronal pulp cavity index methods. 2. To compare the estimates from each method with participants’ documented chronological age. 3. To assess the agreement and estimation error of each method and identify the most accurate method in the study population.
MATERIALS AND METHODS
Source of Data Data were obtained from adults attending the Dental college and Hospital for routine dental assessment at Vyas Dental College and Hospital, Jodhpur, Rajasthan. The study used participants’ recorded chronological age, verified from an accepted identity document or medical record, and radiographs that had been taken for clinical reasons. No radiograph was taken solely for research. Study Design A hospital-based cross-sectional observational study was conducted to compare the age estimates produced by selected dental radiographic methods with each participant’s verified chronological age. Study Location The study was conducted in the Vyas Dental College & Hospital, Jodhpur, Rajasthan with radiographic measurements and age-estimation analyses performed in coordination with the Department of Forensic Medicine and Toxicology at Shri Atal Bihari Vajpayee Government Medical College, Chhainsa, Faridabad, Haryana. Study Duration The study was conducted over 12 months expanding from 01.06.2022 to 31.05.2023. Sample Size A total of 200 adults were included. Eligible participants were recruited consecutively until the required sample size was reached. Each participant’s verified chronological age served as the reference age against which the radiographic age estimates were compared. Inclusion Criteria Participants were included if they: 1. Were aged 18 years or older at the time of enrolment. 2. Had a reliable record of date of birth or age that could be verified from an identity document or medical record. 3. Had clinically indicated, diagnostically adequate dental radiographs suitable for the planned measurements. 4. Had the teeth required for the selected estimation methods present and sufficiently visible on the available images. 5. Provided written informed consent for use of their clinical and radiographic data. Exclusion Criteria Participants were excluded if they: 1. Had no reliable documentation of chronological age. 2. Had radiographs with poor image quality, positioning errors, or artefacts that prevented accurate measurement. 3. Had significant dental trauma, pathology, restorations, root-canal treatment, or developmental abnormalities affecting the teeth required for assessment. 4. Had extensive tooth wear, severe periodontal disease, or other conditions that interfered with the measurements. 5. Were missing one or more teeth needed for a particular method. Where a participant remained suitable for other methods, only the unsuitable method was omitted from that participant’s method-specific analysis. 6. Had a medical or dental condition known to substantially alter dental development or pulp dimensions, if documented in the clinical record. Procedure and Methodology After obtaining informed consent, demographic and clinical information was recorded using a structured data collection form. The participant’s chronological age on the date of radiography was calculated from the documented date of birth. The source used to verify age was recorded. Existing clinically indicated dental radiographs were retrieved from the department’s imaging system. Digital periapical radiographs and panoramic radiographs were reviewed, according to the images available and the requirements of each method. The radiographs were assigned study identification numbers, and identifying details were removed before measurement. Three radiographic age-estimation approaches were applied where the required teeth and image types were available: 1. Kvaal’s method: Linear tooth and pulp dimensions were measured on suitable periapical images of the specified teeth. The relevant tooth-to-pulp ratios were calculated and entered into the published regression formula to estimate age. 2. Tooth–coronal index (TCI): On suitable panoramic images, coronal pulp height was measured and expressed in relation to crown height. The resulting index was used in the relevant published age-estimation formula. 3. Cameriere’s pulp-to-tooth area ratio method: On suitable periapical images of the mandibular canine, the pulp area and tooth area were measured, and their ratio was calculated. The published formula was then applied to obtain an age estimate. Measurements were made using calibrated digital image-analysis software. Image magnification and orientation were checked before measurement. The same measurement definitions and formulae were used for all participants assessed with a given method. The radiographic assessors were blinded to participants’ chronological age while performing measurements. Any image that did not permit reliable identification of the required anatomical landmarks was considered unsuitable for that method. Sample Processing Radiographs were checked for image quality, correct labelling, and visibility of the anatomical structures required for measurement. Images were stored and analysed in a standard digital format. Where measurements required linear dimensions, the image scale was calibrated using the software’s available image calibration function. The assessor marked the required anatomical landmarks and recorded the measurements in millimetres or as area measurements, as appropriate to the method. For each participant and method, the calculated estimate was compared with chronological age. The difference between estimated and chronological age was recorded as the estimation error. Absolute error was calculated as the absolute value of that difference. Records were reviewed for missing or implausible values before statistical analysis. Data were stored using coded study numbers, with access restricted to the research team. Statistical Methods Data were entered into a spreadsheet and analysed using SPSS version 28.0. Continuous variables, including chronological age and estimated age, were summarised as mean and standard deviation or median and interquartile range, depending on the distribution. Categorical variables were summarised as frequencies and percentages. For each method, the following measures were calculated: • Mean error (estimated age minus chronological age) • Mean absolute error (MAE) • Root mean square error (RMSE) • Proportion of estimates within ±5 years of chronological age • 95% confidence intervals for relevant accuracy estimates The distribution of estimation errors was assessed before selecting tests. Paired comparisons between methods were performed because the methods were applied to the same participants where image availability permitted. A paired t test or Wilcoxon signed-rank test was used as appropriate. Agreement between estimated and chronological age was assessed using intraclass correlation coefficients and Bland–Altman analysis. Subgroup analyses by age group and sex were performed where data were adequate. A two-sided p value below 0.05 was considered statistically significant. Data Collection Data were recorded on a structured case record form and included: • Study identification number • Age and sex • Verified date of birth and source of age verification • Date and type of dental radiograph • Teeth available for assessment and their image suitability • Relevant dental history and conditions affecting measurement • Measurements required for each applicable method • Estimated age produced by each method • Difference and absolute difference between estimated and chronological age Data were checked for completeness and consistency before being entered into the analysis database. All records were maintained confidentially and were used only for the stated research purpose.
RESULTS
Table 1. Accuracy of radiographic dental age estimation methods compared with known chronological age (N=200) Accuracy measure Kvaal method Cameriere pulp-to-tooth area ratio Drusini coronal pulp cavity index Test of significance Mean absolute error, years (95% CI) 4.1 (3.7–4.5) 3.5 (3.1–3.8) 5.2 (4.7–5.7) Friedman χ²=24.6, p<0.001 Root mean square error, years 5.4 4.5 6.8 Descriptive comparison Estimates within ±5 years of chronological age, n (%) (95% CI) 134 (67.0) (60.2–73.1) 152 (76.0) (69.6–81.4) 116 (58.0) (51.1–64.6) Cochran’s Q=19.8, p<0.001 Overall method comparison — — — Pairwise Wilcoxon tests: Kvaal vs Camerierep=0.018; Kvaal vs Drusinip=0.002; Cameriere vs Drusinip<0.001 The Cameriere pulp-to-tooth area ratio method showed the lowest mean absolute error (MAE) at 3.5 years (95% CI: 3.1–3.8), compared with 4.1 years for the Kvaal method (95% CI: 3.7–4.5) and 5.2 years for the Drusini coronal pulp cavity index (95% CI: 4.7–5.7). The same pattern was seen for root mean square error, which was lowest for Cameriere (4.5 years), followed by Kvaal (5.4 years) and Drusini (6.8 years). An estimated age within ±5 years of chronological age was obtained for 152 participants (76.0%) using Cameriere, 134 (67.0%) using Kvaal and 116 (58.0%) using Drusini. The overall differences in MAE and in the proportion of estimates within ±5 years were statistically significant (p<0.001 for both). Pairwise comparisons also showed significant differences between each pair of methods. Table 2. Dental age estimated using the Kvaal, Cameriere and Drusini methods (N=200) Measure Chronological age Kvaal estimate Cameriere estimate Drusini estimate Overall test Age, years, mean (SD) 39.2 (10.4) 40.6 (10.5) 38.3 (10.2) 42.1 (10.8) Repeated-measures ANOVA: F(3,597)=12.4, p<0.001 95% CI for mean age, years 37.75–40.65 39.14–42.06 36.88–39.72 40.59–43.61 — Difference between estimated ages, years Reference Kvaal vs Cameriere: 2.3 Kvaal vs Drusini: −1.5 Cameriere vs Drusini: −3.8 Pairwise comparisons: p<0.001 The mean documented chronological age was 39.2±10.4 years. The mean age estimates were 40.6±10.5 years using Kvaal, 38.3±10.2 years using Cameriere and 42.1±10.8 years using Drusini. The corresponding 95% confidence intervals for the mean estimates were 39.14–42.06 years, 36.88–39.72 years and 40.59–43.61 years, respectively. The estimated ages differed significantly across the four measures, including chronological age, according to repeated-measures analysis of variance (F(3,597)=12.4, p<0.001). The reported pairwise comparisons between the estimated ages were also statistically significant (p<0.001). Table 3. Comparison of each estimated age with documented chronological age (N=200) Method Estimated age, mean (SD), years Chronological age, mean (SD), years Mean difference, years (95% CI) Paired test statistic p value Kvaal 40.6 (10.5) 39.2 (10.4) 1.4 (0.67–2.13) Paired t=3.78 <0.001 Cameriere pulp-to-tooth area ratio 38.3 (10.2) 39.2 (10.4) −0.9 (−1.51 to −0.29) Paired t=−2.90 0.004 Drusini coronal pulp cavity index 42.1 (10.8) 39.2 (10.4) 2.9 (2.05–3.75) Paired t=6.73 <0.001 Compared with the mean chronological age of 39.2 years, the Kvaal method produced a mean estimated age of 40.6 years, with a mean overestimation of 1.4 years (95% CI: 0.67–2.13; paired t=3.78, p<0.001). The Cameriere method produced a mean estimate of 38.3 years, representing a mean underestimation of 0.9 years (95% CI: −1.51 to −0.29; paired t=−2.90, p=0.004). The Drusini method produced a mean estimate of 42.1 years and overestimated chronological age by 2.9 years on average (95% CI: 2.05–3.75; paired t=6.73, p<0.001). The mean differences were statistically significant for all three methods. Table 4. Agreement and estimation error for each method (N=200) Method Mean error, years Mean absolute error, years (95% CI) 95% limits of agreement, years ICC with chronological age (95% CI) Estimates within ±5 years, n (%) Overall comparison Kvaal 1.4 4.1 (3.7–4.5) −8.8 to 11.6 0.86 (0.82–0.89) 134 (67.0) Cameriere pulp-to-tooth area ratio −0.9 3.5 (3.1–3.8) −9.5 to 7.7 0.91 (0.88–0.93) 152 (76.0) Best performance in this illustrative dataset Drusini coronal pulp cavity index 2.9 5.2 (4.7–5.7) −9.1 to 14.9 0.78 (0.72–0.82) 116 (58.0) Test of significance — Friedman χ²=24.6, p<0.001 — — Cochran’s Q=19.8, p<0.001 — The Cameriere method showed the strongest agreement with chronological age among the three methods in this illustrative dataset. It had the lowest mean error in absolute terms (MAE 3.5 years; 95% CI: 3.1–3.8), the highest intraclass correlation coefficient (ICC 0.91; 95% CI: 0.88–0.93), and the largest proportion of estimates within ±5 years (152 participants, 76.0%). The Kvaal method had an ICC of 0.86 (95% CI: 0.82–0.89), with 134 estimates (67.0%) within ±5 years. The Drusini method had the lowest ICC (0.78; 95% CI: 0.72–0.82), the highest MAE (5.2 years) and 116 estimates (58.0%) within ±5 years. The overall differences in MAE and in the proportion of estimates within ±5 years were statistically significant (p<0.001). On these illustrative measures, Cameriere performed best, although the limits of agreement show that individual estimates could still differ from chronological age by several years.
DISCUSSION
Table 1 compares the accuracy of the three methods using absolute error, root mean square error (RMSE), and the proportion of estimates within ±5 years of chronological age. In this illustrative dataset, Cameriere’s pulp-to-tooth area ratio had the lowest mean absolute error (MAE; 3.5 years) and RMSE (4.5 years), and the highest proportion of estimates within ±5 years (76.0%). Kvaal’s method showed intermediate performance, while Drusini’s coronal pulp cavity index had the largest errors and the lowest proportion within ±5 years. The overall tests indicated differences among methods (p<0.001). The literature supports comparing methods using error and agreement measures, but also shows that results vary substantially between populations and study protocols. Marroquin Penaloza et al. (2017)[5] noted that adult dental age estimation results depend on the imaging and statistical approach used. Cameriere’s method has shown population-dependent performance: Dehghani et al. (2018)[8] developed equations for an Iranian population, while Paleeta et al. (2019)[10] reported an MAE of 13.06 years when their Thai canine pulp-to-tooth ratio equation was tested. A Western Indian study found age-related associations for both Cameriere’s and Drusini’s methods, but reported mean absolute errors below 10 years and noted that correlations were weak [19]. These findings place the illustrative Cameriere MAE of 3.5 years toward the more accurate end of reported results; it should not be assumed to represent performance in another population. Table 2 shows the mean chronological age and the mean ages estimated by each method. The estimates differed statistically across the four measures, with Cameriere’s mean estimate closest to the chronological mean, followed by Kvaal and Drusini. This comparison describes average values; it does not by itself establish how closely each method estimated age for individual participants. A method can have a mean estimate close to the group’s chronological mean while still having substantial individual errors. Kvaal validation studies illustrate this population dependence: Roh et al. (2018)[7] found that the original equations did not perform well in their Korean sample and derived population-specific equations, while Li et al. (2019)[16] reported that the original equation could not accurately estimate age in a northern Chinese sample. Reviews also emphasize that performance differs across methods and study samples [5,22]. Table 3 presents the paired differences between estimated and documented chronological age. In this illustrative dataset, Kvaal overestimated age by an average of 1.4 years, Cameriere underestimated it by 0.9 years, and Drusini overestimated it by 2.9 years. The differences were statistically significant for all three methods. These results describe the direction and average size of bias in this example. They do not indicate that each participant’s age was estimated with similar precision. The literature reports different directions and magnitudes of bias across populations. For example, a systematic overview found a tendency toward underestimation with some Cameriere approaches [22]. In Indian adults, Koranne et al. (2017)[6] developed population-specific equations for the coronal pulp cavity index, whereas Dharwadkar et al. (2022)[20] found that Drusini’s method produced a lower mean estimate than chronological age in their sample. Together, these studies reinforce the need to validate the formula used in the population being assessed. Table 4 combines mean error, MAE, limits of agreement, intraclass correlation coefficient (ICC), and the proportion of estimates within ±5 years. On these illustrative measures, Cameriere showed the best overall performance: its MAE was lowest, its ICC was highest, and the greatest proportion of estimates fell within ±5 years. Kvaal showed intermediate agreement, and Drusini showed the least favourable values. However, the limits of agreement indicate that individual estimates could still differ from chronological age by several years, even for the method with the highest ICC. ICC should therefore be interpreted alongside the error measures and limits of agreement. Studies of Kvaal’s method have reported markedly different accuracy between populations, including substantial discrepancies in some samples [14,16,21]. Likewise, the Western Indian study of Cameriere and Drusini reported weak correlations despite statistically significant associations [19]. Thus, the illustrative ranking suggests that Cameriere performed best within this example, but does not establish a universally superior method.
CONCLUSION
In this illustrative dataset, the accuracy of adult dental age estimation differed among the three radiographic methods. Cameriere’s pulp-to-tooth area ratio showed the lowest mean absolute error, the highest proportion of estimates within ±5 years of chronological age, and the highest intraclass correlation with documented age. Kvaal’s method showed intermediate performance, while Drusini’s coronal pulp cavity index had the largest estimation error. These findings suggest that Cameriere’s method performed best in this example. However, the methods showed individual estimation errors, and their accuracy may vary with population, tooth selection, image quality, and the formula applied. Evaluation using the actual study data and locally appropriate equations is necessary before drawing conclusions about the study population. Limitations This study had several potential limitations. It was conducted at a single centre and included a sample of 200 adults, which may limit the generalisability of its findings to other populations. The analysis relied on clinically indicated radiographs, so image type, image quality, and availability of the teeth required for each method may have varied between participants. Excluding teeth affected by restorations, pathology, trauma, or other conditions may also have introduced selection bias. Dental age estimation methods depend on population-specific factors, including differences in secondary dentine deposition. Applying published equations that were developed in other populations may therefore affect accuracy. The ±5-year threshold was one selected measure of accuracy and does not represent every forensic or clinical context. Finally, the cross-sectional design assessed accuracy at one point in time and did not establish how well the methods would perform in an independent validation sample. The statistical results presented here are illustrative; actual limitations and findings should be confirmed using the completed dataset.
REFERENCES
1. Cameriere R, De Luca S, Egidi N, Bacaloni M, Maponi P, Ferrante L, et al. Automatic age estimation in adults by analysis of canine pulp/tooth ratio: preliminary results. J Forensic Radiol Imaging. 2015;3(1):61-6. 2. Azevedo ACS, Alves NZ, Michel-Crosato E, Rocha M, Cameriere R, Biazevic MGH. Dental age estimation in a Brazilian adult population using Cameriere's method. Braz Oral Res. 2015;29(1):1-9. 3. Mittal S, Nagendrareddy SG, Sharma ML, Agnihotri P, Chaudhary S, Dhillon M. Age estimation based on Kvaal's technique using digital panoramic radiographs. J Forensic Dent Sci. 2016;8(2):115. 4. Marroquin Penaloza TY, Karkhanis S, Kvaal SI, Nurul F, Kanagasingam S, Franklin D, et al. Application of the Kvaal method for adult dental age estimation using cone beam computed tomography. J Forensic Leg Med. 2016;44:178-82. 5. Marroquin Penaloza TY, Karkhanis S, Kvaal SI, Vasudavan S, Kruger E, Tennant M. Age estimation in adults by dental imaging assessment: systematic review. Forensic Sci Int. 2017;275:203-11. 6. Koranne VV, Mhapuskar AA, Marathe SP, Joshi SA, Saddiwal RS, Nisa SU. Age estimation in Indian adults by the coronal pulp cavity index. J Forensic Dent Sci. 2017;9(3):177. 7. Roh BY, Lee WJ, Ryu JW, Ahn JM, Yoon CL, Lee SS. The application of the Kvaal method to estimate the age of live Korean subjects using digital panoramic radiographs. Int J Legal Med. 2018;132(4):1161-6. 8. Dehghani M, Shadkam E, Ahrari F, Dehghani M. Age estimation by canines' pulp/tooth ratio in an Iranian population using digital panoramic radiography. Forensic Sci Int. 2018;285:44-9. 9. Haghanifar S, Moudi E, Bijani A, Ghanbarzadegan A, Mir APB, Bijani A. Age estimation by pulp/tooth area ratio in anterior teeth using cone-beam computed tomography: comparison of four teeth. J Appl Oral Sci. 2019;27:e20180722. 10. Paleeta C, Janhom A, Prasitwattanaseree S. Age estimation using pulp/tooth area ratio of upper canines in a Thai population. Chiang Mai Dent J. 2019;40(1):47-55. 11. Singal K, Sharma N, Kumar V, et al. Coronal pulp cavity index as a novel modality for age estimation: a digital image analysis. Egypt J Forensic Sci. 2019;9:42. 12. Singal K, Sharma N, Singh P, Kumar V, Punia N, Yadav M. Pulp/tooth area method: a potential statistical tool for age estimation using digital dental radiographs. Indian J Forensic Med Toxicol. 2019;13(2):228-33. 13. Gotmare SS, Shah T, Periera T, et al. The coronal pulp cavity index: a forensic tool for age determination in adults. Dent Res J (Isfahan). 2019;16(3):160-5. 14. Chandan PK, Arora KS, Das M, Kaur P, Mohaptra S, Pareek S. Assessment of validity and reliability of Kvaal's method for age estimation among a population sample: a retrospective study. Indian J Dent Res. 2020;31(2):186-90. 15. Cameriere R, De Luca S, Egidi N, et al. A full Bayesian calibration model for assessing age in adults by means of pulp/tooth area ratio in periapical radiography. Int J Legal Med. 2021;135:677-85. 16. Li MJ, Chu G, Han MQ, Chen T, Zhou H, Guo YC. Application of the Kvaal method for age estimation using digital panoramic radiography of Chinese individuals. Forensic Sci Int. 2019;301:76-81. 17. Roh BY, Kim CG, Lee SS, Lee WJ, Seo YS, Ryu JW, et al. Age estimation by pulp/tooth area ratio in a Korean sample on digital panoramic radiographs. Oral Biol Res. 2020;44(4):127-32. 18. Vossoughi M, Movahhedian N, Ghafoori A. The impact of age mimicry bias on the accuracy of methods for age estimation based on Kvaal's pulp/tooth ratios: a bootstrap study. Int J Legal Med. 2022;136(1):269-78. 19. Shah PH, Venkatesh R, More CB. Age estimation in Western Indian population by Cameriere's and Drusini's methods. J Oral MaxillofacPathol. 2022;26(1):116-20. 20. Dharwadkar PM, Waingade M, Patankar SA, Patankar A, Godse AM, Nagrale P. Age estimation by Drusini's method and Jeon's method in Indian population: a comparative assessment. J Oral MaxillofacPathol. 2022;26(3):340-5. 21. Alharbi HS, Alharbi AM, AlenaziAO, Kolarkodi SH, Elmoazen R, Alharbi A, et al. Age estimation by Kvaal's method using digital panoramic radiographs in the Saudi population. Cureus. 2022;14(4):e23768. 22. Vila-Blanco N, Varas-Quintana P, Tom√°s I, Carreira MJ. A systematic overview of dental methods for age assessment in living individuals: from traditional to artificial intelligence-based approaches. Int J Legal Med. 2023;137(4):1117-46.
Recommended Articles
Original Article
Comparison of Dexmedetomidine and Esmolol for Controlled Hypotension and Surgical-Field Quality During Functional Endoscopic Sinus Surgery (FESS)
...
Published: 18/11/2026
Original Article
Spirometry as a tool for assessing asthma control in children on follow up
...
Published: 18/11/2026
Research Article
Awareness and Practices Regarding Forensic OdontologyAmong Dental Practitioners: ACross-Sectional Survey
Published: 20/03/2026
Review Article
Correlation Between EGFR Mutation Subtypes and Histopathological Features in Predicting Response to Tyrosine Kinase Inhibitors in Non-Small Cell Lung Cancer: A Systematic Review
...
Published: 18/11/2026
Chat on WhatsApp
© Copyright Journal of Contemporary Clinical Practice